โ† Dashboard

Infection Control

Handwashing, PPE, standard precautions, isolation techniques, and preventing infection spread.

14% of NNAAP examยท70 practice questions

Key Concepts โ€” Part 1

1. When performing hand hygiene, what is the minimum amount of time you should wash your hands with soap and water?

โœ“ 20 seconds

According to CDC guidelines and NNAAP standards, hands should be washed with soap and water for at least 20 seconds to effectively remove microorganisms. 10 seconds is insufficient for proper cleansing. 30 and 60 seconds are longer than necessary for routine handwashing.

2. Which of the following situations requires handwashing before donning gloves?

โœ“ All of the above

Hands must be washed before eating, before using the bathroom, and before and after patient care to prevent the spread of infection in all situations. Proper hand hygiene is essential in every circumstance to maintain infection control standards.

3. You notice a patient's isolation sign indicates contact precautions. What is the primary reason for this isolation type?

โœ“ To prevent transmission through direct contact or contaminated surfaces

Contact precautions are used when a patient has an infection spread through direct contact with the patient or contaminated surfaces. Airborne precautions prevent airborne transmission, droplet precautions prevent droplet transmission, and standard precautions address bloodborne pathogen exposure. Contact precautions require gloves and gowns when entering the room.

4. When should you change your gloves during patient care?

โœ“ Only when moving between different body sites or tasks

Gloves should be changed when moving between different body sites or tasks on the same patient (for example, after helping with toileting and before assisting with meals). While changing gloves only at shift end and only when visibly soiled are incorrect, the most comprehensive answer is changing between different body sites/tasks. This prevents cross-contamination during care.

5. Which piece of personal protective equipment (PPE) should be put on first when entering an isolation room?

โœ“ Gown

The proper order for donning PPE is: gown first, then mask, then eye protection, and finally gloves last. The gown should be put on first to prevent contamination of underlying clothing. Gloves are applied last to cover the wrist of the gown.

6. What is the correct order for removing PPE (doffing) when leaving an isolation room?

โœ“ Gloves, gown, mask, eye protection

The correct order for removing PPE is: gloves first, then gown, then mask, and finally eye protection last. This order prevents self-contamination because gloves are removed first (as they are most contaminated), followed by the gown, then the mask, and eye protection last. Removing in this sequence reduces the risk of transmitting pathogens to your face and eyes.

7. A patient has diarrhea caused by Clostridioides difficile (C. difficile). Which precaution type is most appropriate?

โœ“ Contact precautions

C. difficile is transmitted through contact with contaminated feces and surfaces, so contact precautions are required. This includes wearing gloves and a gown. Droplet and airborne precautions are not appropriate for C. difficile as it is not spread through respiratory droplets or air. Standard precautions alone are insufficient.

8. When is it appropriate to use hand sanitizer instead of handwashing with soap and water?

โœ“ When soap and water are unavailable and hands are not visibly soiled

Hand sanitizer can be used when hands are not visibly soiled and soap and water are unavailable. However, if hands are visibly soiled with blood, body fluids, or other contaminants, soap and water must be used as sanitizer is less effective in these situations. Sanitizer should not be the first choice when water is available.

9. A patient is on airborne precautions for suspected tuberculosis. What type of mask should you wear when entering the room?

โœ“ N95 respirator mask

An N95 respirator mask provides the appropriate level of protection for airborne precautions such as tuberculosis. A surgical mask is not sufficient for airborne pathogens as it does not filter inhaled air. Cloth masks and no mask are inappropriate and would not provide protection against airborne transmission.

10. What is the primary purpose of standard precautions?

โœ“ To assume all blood and body fluids are potentially infectious regardless of patient diagnosis

Standard precautions are based on the principle that all blood, body fluids, secretions, and excretions may contain pathogens, regardless of the patient's diagnosis or whether an infection is known. This approach should be used with all patients at all times. It is not limited to only bloodborne pathogens or only known infections.

Key Concepts โ€” Part 2

1. You accidentally stick yourself with a contaminated needle. What should you immediately do first?

โœ“ Immediately wash the area with soap and water

You should immediately wash the area with soap and water. While reporting to your supervisor is important, it comes after first aid. Applying a tourniquet is not appropriate for needlestick injuries. Squeezing the wound is generally not recommended as it can increase tissue damage. Immediate cleansing is the first priority.

2. When disposing of sharps, what must you use?

โœ“ Designated sharps container

All sharps (needles, syringes, lancets, etc.) must be placed in a designated, puncture-resistant sharps container. Using regular trash, toilets, or other waste receptacles is dangerous and against infection control protocol. This protects healthcare workers and environmental safety.

3. A patient has a productive cough and fever. The patient is suspected of having influenza. What precautions should be implemented?

โœ“ Droplet precautions

Influenza is spread through respiratory droplets, so droplet precautions are appropriate. This includes wearing a surgical mask and maintaining distance from the patient. Contact precautions are used for conditions spread through touch, airborne precautions for diseases like tuberculosis, and standard precautions alone are insufficient for flu.

4. What should you do if you tear your glove while providing patient care?

โœ“ Immediately remove the torn glove and put on a new pair

You should immediately remove the torn glove and put on a new pair to maintain infection control. Continuing with a torn glove compromises protection and creates a contamination risk. Tape is not an appropriate solution. Handwashing alone does not replace the need for intact gloves during patient care.

5. Which of the following is a correct principle of infection control?

โœ“ Equipment used on one patient should be cleaned before use on another patient

All equipment and surfaces that contact patients must be cleaned and disinfected between patients to prevent cross-contamination. Touching your face with gloved hands can spread pathogens. Gloves should never be reused. Handwashing is required throughout the day in multiple situations, not just before eating.

6. A patient requires droplet precautions. Where should this patient ideally be placed?

โœ“ In a private room with the door closed

A patient on droplet precautions should ideally be placed in a private room with the door closed to prevent respiratory droplets from reaching other patients. If a private room is unavailable, specific cohorting (grouping patients with the same infection) may be used. Placing them in any shared room without proper precautions risks spreading infection.

7. What does the acronym PPE stand for?

โœ“ Personal Protective Equipment

PPE stands for Personal Protective Equipment. This includes gloves, masks, gowns, and eye protection that healthcare workers wear to protect themselves and patients from infection. The other options are incorrect terms not used in healthcare infection control.

8. When should you perform hand hygiene before putting on gloves?

โœ“ Before every patient contact

Hands should be cleaned before every patient contact, before donning gloves. Gloves do not eliminate the need for handwashing; they are an additional barrier. Even if hands don't appear dirty, they may harbor microorganisms. Handwashing must occur throughout the shift, not just at the beginning.

9. A patient with chickenpox (varicella) is admitted. What type of precautions are required?

โœ“ Droplet and contact precautions

Chickenpox requires both airborne and contact precautions because the varicella virus spreads through respiratory droplets, direct contact with rash lesions, and airborne particles. The correct answer is that both droplet and contact precautions (which together equal airborne and contact precautions) are needed. Droplet or contact precautions alone are insufficient.

10. What is the correct technique when removing a contaminated gown?

โœ“ Peel it from the front, rolling it inward to contain contamination

A contaminated gown should be peeled away from the body, rolling it inward as you remove it. This prevents the contaminated outer surface from touching your skin or clothing. Pulling from the neckline, slow removal, and folding from the outside don't address proper containment of contaminants.

Key Concepts โ€” Part 3

1. How long should you avoid touching your face after removing gloves from a patient with a respiratory infection?

โœ“ Wash your hands first, then you can touch your face

You should wash your hands immediately after removing gloves before touching your face. Handwashing removes any pathogens that may have contaminated your hands despite glove use. You should not wait or touch your face before washing hands, as this risks introducing pathogens to mucous membranes.

2. What is the most common route of transmission of healthcare-associated infections (HAIs)?

โœ“ Contaminated hands of healthcare workers

Contaminated hands of healthcare workers are the most common route of transmission for healthcare-associated infections. This is why proper hand hygiene and glove use are so critical. While airborne, environmental, and bloodborne transmission occur, hand contamination accounts for the majority of HAI transmissions.

3. A patient on contact precautions needs to be transported to radiology. What should you do?

โœ“ Use appropriate PPE and notify receiving department of precautions

When transporting a patient on contact precautions, you should use appropriate PPE, alert the receiving department, and take measures to prevent contamination during transport. The patient should maintain precautions, and staff at receiving areas must be informed. Ignoring precautions during transport spreads infection beyond the patient's room.

4. Which situation would NOT require a change of gloves?

โœ“ After removing contaminated dressings and before checking vital signs on the same patient

After removing contaminated dressings and before checking vital signs on the same patient, you may continue with the same gloves if they are still intact and not visibly soiled, as you are moving from a contaminated area to a less contaminated task on the same patient. However, best practice suggests changing gloves between different body areas. The other options all involve transitioning from a highly contaminated task to clean tasks or different patients, requiring glove changes.

5. What is the primary reason for using standard precautions with every patient, regardless of diagnosis?

โœ“ Because you cannot always know a patient's infection status

Standard precautions are used with every patient because you cannot always know a patient's infection status or if they are carrying pathogens. Some patients may be asymptomatic carriers or undiagnosed. Using standard precautions universally is more effective than trying to identify which patients need protection. It protects against all potential pathogens, not just bloodborne ones.

6. When washing hands, what is the minimum recommended length of time you should scrub with soap and water?

โœ“ 20 seconds

The CDC recommends washing hands for at least 20 seconds to effectively remove germs and pathogens. 10 seconds is too short to be effective. 40 and 60 seconds are longer than necessary and waste time.

7. Which of the following is the most important time to wash your hands as a nursing assistant?

โœ“ Before and after patient contact

Before and after patient contact is critical for infection control to prevent spreading pathogens between patients and to yourself. While after using the restroom and before eating are important, before and after patient care is the priority in healthcare settings. Beginning of shift is too vague.

8. What should you do if soap and water are not available when caring for a patient?

โœ“ Use hand sanitizer with at least 60% alcohol content

Alcohol-based hand sanitizer with at least 60% alcohol is an acceptable alternative when soap and water are not available. Waiting is impractical in patient care. Wiping on cloth is ineffective. Gloves alone do not eliminate the need for hand hygiene.

9. You are assisting a patient with bedside hygiene and notice they have visible blood on their skin. What type of PPE should you wear at minimum?

โœ“ Gloves and a gown

Blood exposure requires gloves and a gown at minimum under standard precautions. Gloves alone do not provide adequate protection for potential splashing. Face shield and goggles are added only if splashing is likely. Full PPE listed in choice D is excessive for this scenario.

10. When removing contaminated gloves, what is the correct first step?

โœ“ Pinch the outside of one glove near the wrist and peel it off

You should pinch the outside of one glove near the wrist (avoiding bare skin contact) and peel it off, turning it inside-out. Removing both at once is incorrect procedure. Washing before removal doesn't make sense. Grasping the palm risks contamination of bare skin.

Key Concepts โ€” Part 4

1. A patient is on contact precautions for a skin infection. What does this mean regarding your PPE?

โœ“ You must wear gloves and a gown for direct patient contact

Contact precautions require gloves and gown for anyone having direct contact with the patient. Respirators are for airborne precautions, not contact. Gloves should be worn for all direct contact, not just non-intact skin. Antibiotics don't eliminate the need for precautions during treatment.

2. What is the primary purpose of using standard precautions?

โœ“ To treat all patients' blood and body fluids as potentially infectious

Standard precautions are based on treating all blood and body fluids as potentially infectious, regardless of the patient's diagnosis. They apply to all patients, not just immunocompromised ones. Standard precautions work alongside specific isolation precautions when needed. While they help protect visitors, that's not the primary purpose.

3. You accidentally splash patient blood into your eye. What should you do immediately?

โœ“ Rinse your eye with water for at least 15 seconds and report the incident

You must immediately rinse the eye with water for at least 15 seconds and report the bloodborne pathogen exposure incident for proper follow-up and documentation. Rubbing the eye can cause more damage. Waiting to see if symptoms develop delays necessary medical evaluation. Ointment and bandage are not appropriate first aid for an eye exposure.

4. A patient is in droplet precautions for influenza. Which action is most important for preventing transmission?

โœ“ Keep the patient's door closed and wear a mask when within 3-6 feet

Droplet precautions require a mask for close contact (within 3-6 feet) and keeping the door closed. Patients don't wear respirators; healthcare workers do. Negative pressure is for airborne precautions. Complete visitor restriction is too strict for droplet precautions; visiting is allowed with precautions.

5. Which of the following statements about N95 respirators is correct?

โœ“ They filter at least 95% of airborne particles

N95 respirators filter at least 95% of airborne particles, which is how they get their name. Many facilities have moved to single-use for infection control. They are used for airborne precautions, not contact/droplet. Fit testing is required to ensure proper seal and effectiveness.

6. You notice a patient has signs of a respiratory infection but has not been placed on precautions yet. What should you do?

โœ“ Notify the nurse immediately so appropriate precautions can be implemented

You should immediately notify the nurse so they can assess the patient and implement appropriate precautions if indicated. Standard precautions alone may be insufficient for a respiratory infection. Waiting or taking independent action delays proper care and increases transmission risk.

7. When should a surgical mask be changed?

โœ“ Every 2-4 hours or when it becomes damp or soiled

Surgical masks should be changed every 2-4 hours or when they become damp or soiled, as moisture reduces their effectiveness. Every 8 hours is too long. Waiting until visibly dirty is too late for protection. Weekly reuse is not appropriate for infection control.

8. A patient with MRSA (methicillin-resistant Staphylococcus aureus) is being admitted to your facility. What precautions should be implemented?

โœ“ Contact precautions with gloves and gown

MRSA requires contact precautions because it spreads through direct or indirect contact with contaminated surfaces or skin. It does not require airborne or droplet precautions. Standard precautions alone are insufficient for MRSA.

9. You are wearing a gown during patient care. When should you remove it?

โœ“ Immediately after patient contact, before leaving the room

The gown should be removed immediately after patient contact, before leaving the room, to prevent contamination of other areas. Removing it before leaving but after hand washing risks recontamination. Keeping it on until end of shift spreads pathogens throughout the facility.

10. What is the correct order for removing PPE?

โœ“ Eye protection, gown, gloves, mask

The correct order is eye protection first, then gown, then gloves, then mask last. This sequence prevents contamination of clean areas. Starting with gloves risks contaminating your hands. Removing the mask early defeats its purpose. The order matters to maintain infection control.

Key Concepts โ€” Part 5

1. A patient sneezes while you are providing direct care without a mask. What should you happen next?

โœ“ Notify infection control and document the potential exposure

Potential exposures should be reported and documented for your health and the facility's records. A single sneeze can transmit respiratory droplets. Putting on a mask after exposure doesn't help the current situation. Hand washing alone doesn't address respiratory exposure; monitoring and documentation are necessary.

2. Which situation would require airborne precautions?

โœ“ All of the above

All three conditions require airborne precautions: active tuberculosis, chickenpox, and measles are airborne. While influenza is typically droplet precautions, some pandemic strains require airborne precautions. This question tests knowledge of which pathogens require the highest level of respiratory protection.

3. You accidentally stick yourself with a used needle from a patient's bedside. What is the first thing you should do?

โœ“ Wash the wound with soap and water

Immediately wash the wound with soap and water, then report it. Squeezing promotes bleeding which can increase infection risk. While reporting is essential, washing first is the immediate action. A bandage without washing is insufficient. All of these steps are important, but washing comes first.

4. A patient on airborne precautions needs to leave their room for a procedure. What should the patient wear?

โœ“ A surgical mask to protect others from the patient's airborne particles

The patient should wear a surgical mask when leaving the room to protect others from airborne particles. The patient does not need an N95. Assuming other rooms have precautions is unsafe. A gown and gloves are contact precautions, not respiratory protection.

5. What is the most common way infections are transmitted in healthcare settings?

โœ“ Through contaminated hands and surfaces

Contaminated hands and surfaces are the most common transmission route in healthcare. While airborne transmission occurs, it's less common. Food/water and insect vectors are rare in healthcare facilities. This is why hand hygiene is the foundation of infection control.

6. A colleague is about to care for a patient with hepatitis B without wearing gloves. What should you do?

โœ“ Politely point out that gloves are required for this patient

You should politely remind your colleague of the infection control requirement. Hepatitis B is transmissible through blood and body fluid exposure. Saying nothing is a safety risk. Immediately reporting may be excessive if a reminder works, though reporting is appropriate if unsafe practice continues.

7. When donning PPE, what is the correct order to put items on?

โœ“ Mask, eye protection, gown, gloves

The correct order is mask first (protects your face), then eye protection (protects eyes), then gown (protects torso and arms), and finally gloves last (cover wrists of gown). This sequence ensures all items are layered correctly for maximum protection. Other orders result in gaps in coverage or contamination of clean PPE.

8. A patient has a urinary tract infection (UTI) and is not on isolation precautions. Should you wear any special PPE?

โœ“ No special precautions are needed beyond standard precautions

UTIs do not require special precautions beyond standard precautions. UTIs are not communicable in the way that contact or airborne diseases are. Standard precautions with hand hygiene and appropriate handling of urine are sufficient. Fever alone doesn't indicate airborne transmission for a UTI.

9. You are assisting a patient with dementia who keeps removing their isolation precaution signs. What should you do?

โœ“ Replace the signs repeatedly and notify the nurse of the situation

You should replace the signs and notify the nurse, who can provide appropriate care and possibly assign more frequent observation. Allowing sign removal defeats infection control efforts. Restraints are not an appropriate solution to this problem. Documentation alone without action is insufficient for patient and staff safety.

10. What is the most effective way to prevent healthcare-associated infections (HAIs)?

โœ“ Implementing strict hand hygiene practices

Hand hygiene is the single most effective and evidence-based method for preventing HAIs. Prophylactic antibiotics can lead to resistance and aren't appropriate for all patients. Masks and visitor restrictions may help but are secondary to hand hygiene. This is supported by CDC and WHO guidelines.